Hydraulic Machine Lift for Equipment Handling

KRM-1460 Hydraulic Hoist

The KRM-1460 Hydraulic Hoist is an advanced hydraulic lifting solution, specifically engineered for trucks with a gross vehicle weight (GVW) range of 6000–9000 kg. It's built to give your tipper bed plenty of hydraulic muscle while keeping the whole framework compact enough that it won't take over your entire chassis layout. We used some really tough components and a stable fluid setup so the bed goes up and down smoothly without any awkward jerking, even when you're working out in rough environments day after day. You'll usually find it mounted on transport rigs, construction haulers, and commercial work trucks where people just want to get their loading cycles done quicker and safer.

Contact Now

Advantages

1. Serious lifting muscle

This hoist system is no slouch when it comes to heavy hauling. It's rated to handle anywhere from 5,000 to 10,000 kg on a normal day, and if you're tipping at a 60-degree angle, it can actually push through loads up to 18,000 kg without buckling under the pressure.

2. A hydraulic system that doesn't quit

The pressure specs on this thing are pretty solid. It runs on a 6.4 MPa working pressure, paired with a KP-55A pump that turns out 55 ml/rev at 800 rpm. We even tested the maximum pressure tolerance up to 20.6 MPa, so you know it's built to hold its own during grueling shifts.

3. Tight, adaptable build

It's sized nicely for medium trucks sitting in the 6,000 to 9,000 kg GVW range. The whole assembly is kept reasonably compact, which means you can bolt it onto different truck chassis without cutting into your frame space or hurting your overall lifting performance.

Key Features

1. Beefy hoist cylinder

The main cylinder is built to take a beating, operating smoothly at 6.4 MPa. It features a 140 mm inner bore, a 501 mm stroke, and a thick 60 mm piston rod. It can handle peak pressure spikes up to 14.7 MPa, so you don't have to worry about blown seals when the bed gets heavy.

2. Dependable pump output

The KP-55A pump keeps your fluid moving right when you trip the lever. Running at 800 rpm with a 55 ml/rev displacement, it's tough enough to manage high-pressure demands up to 20.6 MPa, which means your bed goes up smoothly instead of stuttering halfway through.

3. Forgiving installation layout

With a 400 mm rear overhang, a 1,300 mm load-center-to-hinge distance, and 1,100 mm between the trunnion and hinge, the geometry works in your favor. It balances out the weight naturally across the chassis and saves you a ton of fabrication headaches whether you're building a new tipper or retrofitting an old rig.

Applications

You're mostly going to find the KRM-1460 working hard in logistics hubs, busy construction zones, and heavy industrial fleets. Thanks to that massive lift capacity and tight footprint, it's a great fit for guys who spend their days dumping heavy raw materials, moving bulky construction machinery around, or hauling awkward industrial cargo that regular trucks can't handle.

Hoist Mechanism, Dimensions, and Weight(approx.)

Length(mm)	Width(mm)	Height(mm)	Min.Closed Length(mm)	Weight(kg)
1160	410	250	780	162

Hoist Cylinder and Pump Combination Specifications(approx.)

Hoist Cylinder KRM1460	Working Pressure	Mpa	6.4	Gear Pump KP-55A	Rotating Speed	rpm	800
	Working Pressure	kgf/cm²	65		Discharge Volume	ml/rev.	55
	Inner Diameter	mm	140		Max.Testing Pressure
	Stroke	mm	501			Mpa	20.6
	Min.Close Distance	mm	714			kgf/cm²	210
	Piston Rod Diameter	mm	60		Weight	kg	13
	Max. pressure	Mpa	14.7
		kgf/cm²	150

Hoist Mounting and Maximum Lifting Capacity

Recommended Truck G.W.(kg)	Body Length(mm)	Rear Overhang Length(mm)	Distance between load center and hinge(mm)	Distance between trunnion and hinge(mm)	Rated Lifting Capacity(kg)	Designed Max. lifting Capacity (kg)(including load weight)
6000-9000	3400	400	1300	1100	5000-10000	18000/60°